220V 250W 400W 500W Permanent Magnet Motor Slow Speed Low Noise Motor Pure Copper Wound Double Bearing CW CCW(Only Motor,400W 7000rpm)

Generators220V 250W 400W 500W Permanent Magnet Motor Slow Speed Low Noise Motor Pure Copper Wound Double Bearing CW CCWNotice:(1) The motor is 220V and must be connected to the provided rectifier bridge in order to use 220V AC power; Never directly connect the motor to 220V AC power. If it is connected incorrectly and burned out, our store will not be responsible.(2) The motor has no heat dissipation function, and it is recommended to control the usage time for 250W/500W and 4000 rpm within one hour; Within 40 minutes of 400W.(3) If used in belt sanding machines, table saws, table drills, and lathes, an unpowered must be added and the motor cannot be used directly, as this can easily overload and burn out the motor.(4) The motor is a carbon brush motor with a lifespan of about 2500 hours. It supports forward and reverse rotation and requires a self equipped forward and reverse switch.(5)Precautions for using speed controllers:The speed control range is 10% -100%. The lower the speed, the smaller the force. When the load is too large, there will be a phenomenon of burning the motor or speed controller. So it is recommended that you use a certain speed, buy a similar speed, and make slight adjustments to the speed controller instead of a large speed adjustment. Permanent Magnet Motor *1or Permanent Magnet Motor*1 and bracket*1==========Construction : Permanent MagnetProtect Feature : Totally EnclosedOutput Power : 250W 400W 500W

• Generators
• 220V 250W 400W 500W Permanent Magnet Motor Slow Speed Low Noise Motor Pure Copper Wound Double Bearing CW CCW