3-in-1 Plastic Granule Dehumidifier Dryer 25Kg Industrial Plastic Dryer Dehumidifying Dryer 220V

Product Overview:<br> The three-in-one dehumidifying, drying, and feeding system comprises a honeycomb dehumidifier, an insulated drying barrel, and a material suction unit. All equipment is mounted on a mobile stand, integrating dehumidification, drying, and feeding functions. It is suitable for various plastic raw materials, especially highly hygroscopic engineering plastics such as PA, PC, LCP, PET, and PBT. Under ideal conditions, it can achieve a dew point of -40℃.<br> The machine delivers uniform hot air distribution for high drying efficiency. Its proportional-integral temperature controller maintains temperature within ±3℃ tolerance.<br> <br> Product Parameters:<br> Voltage: AC220V<br> Phase Number: 3<br> Hopper Capacity: 55LBS (25KG)<br> Dehumidification Air Volume: 30m3/Hr<br> Drying Heating Power: 3KW<br> Fan Power: 0.75KW<br> Regeneration Heating Power: 3KW<br> Fan Power: 0.4KW<br> Feeding Fan Power: 1.1KW<br> Suction Machine Piping (Standard Configuration): 1.5" (38.1mm)<br> Vacuum Hopper: 2Gal (7.5L)<br> Photosensor Hopper: 2Gal (7.5L)<br> Bucket Material: Stainless Steel<br> Net Weight / Gross Weight: 497.1lbs(225.5kg) / 637.1lbs(289.0kg)<br> <br> Precautions<br> 1. The installation site of the machine should take into account the situation of other equipment and material stacking, and it is recommended to leave appropriate space around it.<br> 2. The machine's working environment requires a clean and tidy room. When drying raw materials that may generate toxic gases, reserve space for installing an exhaust system.<br> 3. Please note: Due to the high power consumption of this product, a power plug is not included. We recommend that the buyer consult a professional electrician for the installation of a suitable circuit breaker.<br> <br> Item Included (029162):<br> Techtongda 3-in-1 Plastic Granule Dehumidifier Dryer 220V<br> Suction Tube *1<br> Suction Gun *1<br> Hopper Gasket *1

• Working Principle: Air is blown into the heating tubes within the drying cylinder via a fan. The temperature controller regulates the air supply temperature, creating a uniform airflow within the drying cylinder to achieve the drying effect.
• The insulated drying hopper adopts a bottom-blowing air duct design, paired with a cyclone exhaust device to prevent heat loss and improve drying efficiency.
• It is matched with a closed-loop feeding system, which prevents the dried material from re-absorbing moisture due to contact with external air.
• All contact components and raw materials of this machine are made of stainless steel, preventing contamination of the raw materials.
• This machine dries raw materials dampened during packaging and transportation while removing surface moisture. It is suitable for PP, PE, ABS, PVC and other raw materials.