5FTx6FT PET Super Gloss Metallic Teal High Glossy Vinyl Wrap Auto Car Sticker Decal Film Sheet Bubble Free Air Release Technology with Tool Set

Specifications: Finish: Super True Gloss Film: Vinyl, Hybrid Composite Material (Cast / Calendar) Thickness (Face only): 3.7 - 4.1 mil Thickness (Adhesive): 1.6 mil Film Type: High-grade polymeric vinyl film Adhesive: Low-Tack Solvent Acrylic Protective Liner: PET Liner Release Liner: PET Liner Flammability: Self-Extinguishing Removable: Removable with heat Storage Period: 3 Years from the Manufactured Date in Temperature Range of 68 F - 78 F (20 C - 26 C) Relative Humidity 50%, Indoor Storage in Original Package Post-Heat Temperature: 175 F - 185 F (79.5 C - 85 C) Recommended Installation Area Temperature: 70 F - 80 F (24 C - 26.5 C) Comfortability: Flat, simple and moderate compound curves, convex and concave surfaces Directional: All vinyl films are recommended to be installed directionally. Test the film if non directional installation is desired. Overlap width: 3-4mm Dimensional stability: shrinkage less than 2% Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt Application Method: Dry Application Only The color of the images shown here may vary depending on your screen settings. For the real representation of the product always check the color swatch or Sample. Important Check vinyl before use. If you see defects , contact us immediately and do NOT cut or use. Partially cut vinyl storage - must remove top clear protective film. If not, it will cause tunneling, Unused roll of vinyl storage - must TIGHTLY ( no gap between layers ) roll the vinyl and tape up to avoid tunneling.

• Free Tool Kit Requirement: Size 4"x8" DO NOT come with Tool Kit; Limited 1 Set of Tool Kit for each Account ONLY regardless of quantity purchase
• Bubble free air release channel. Self adhesive peel and stick. Resists most mild acids, mild alkalis and salt
• Easy to fit in most tight spots or corners (primer 94 is requireed for non sticky surfaces, curves & corners). Heat gun or household blow dryer for shaping is required
• Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day
• Due to different monitors/calibrations, colors may vary slightly from the pictures