6" and 8" Adjustable DuraTech Roof Support - 6DT-ARS

★★★★★ 4.3 121 Bewertungen

€38.79
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von aiignitestudio.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€38.79
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 20.09.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von aiignitestudio.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 232767459 Erscheinungsdatum 2026/06/21 Listenpreis €38.79 Modellnummer 232767459
Kategorie

DuraTech Roof Support is designed to support the chimney and allow the chimney to pass through the roof and extend down from the ceiling. It is ideal for cathedral ceilings and free-standing fireplace installations supporting up to a maximum total chimney length of 45' and 20' below the roof support. DuraTech Roof Support is adjustable to accommodate different roof pitches. The trim collar required for this installation is not included and must be purchased separately.

Designed for use with 6'' and 8'' diameter DuraTech Chimney Pipe

A Firestop is required when the chimney passes through ceilings/floors without a "Support Box". Since you are using a Roof Support system, firestops are required at every ceiling penetration and an attic insulation shield above it if the vent is passing through an attic space.

DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built.

See all 6" DuraTech Chimney Pipe.

Additional Information:

With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. Designed for normal, continuous operation at 1000 Degrees F flue gas temperatures, DuraTech is subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1400 Degrees F, plus three ten minute chimney fire tests at 2100 Degrees F.

Adobe PDF Icon  Chimney Installation Instructions

Adobe PDF Icon  Shroud Installation Instructions

California Proposition 65 Warning SymbolWARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.


Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.3 von 5
★★★★★
121 Bewertungen | 50 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
80% (97)
4 Sterne
6% (7)
3 Sterne
3% (4)
2 Sterne
1% (1)
1 Stern
10% (12)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.