Antique Knob Retrofit Kit 1900-PB1- If You Have The Antique Knobs, Tubular Latch and Spindle This is Your Retrofit kit. (Polished Brass)

A very affordable to install Antique Knobs (or reproductions) in modern drilled doors. With a hot glue gun the Exclusive Wood Adapters to be able to install the antique original backplates, knobs and latch in modern pre-drilled doors. The hardware contains: Two 2-1/2” Rosettes with matching #6 wood screws, Two handmade Wood Adapters, to Retrofit Modern Pre-drilled doors and a calling card size Instructions. Although they are this simple: (1) Install your Latch set (2) Glue wood adapters with hot glue gun, (3) Secure door plates by tightening the Knobs , (4) drill pilot holes and fasten door plates with wood screw , (5) Then Adjust the door knobs and Bolt securely to the square side of the spindle. TOOLS NEEDED TO INSTALL THIS SET:, one 3/16” slotted screwdriver and one Phillips head screwdriver. one hot glue gun and a power drill to drill pilot hole in the wood adapters. This set is time-tested in several thousand installation, mostly by home owners (contractors usually do not like’em). Assembled in USA and Guaranteed to your satisfaction with Three Generations of experience.

• PERFECT SOLUTION to fit your antique or reproduction knobs in modern drilled doors
• BORE HOLE ADAPTERS securely hold your latch & spindle in place
• SIZE 2-1/2” Rosettes with matching screws
• BACKSET 2-3/8 inch