Ascaso Stainless Steel Steam Wand Tip O-ring - Large

Steam Wand Tip O-ring (Large) - Ascaso 12 mm Cool-Touch Wands

The larger of the two o-rings used with Ascaso's 12 mm diameter cool-touch steam wands, installed on the outside of the steam wand tip at the base of the threads. If your wand tip is weeping or hissing at the base, a hardened or cracked o-ring here is often the cause.

SPECIFICATIONS

• 6 mm ID x 1.5 mm cross-section

COMPATIBILITY

• Fits: Ascaso 12 mm diameter cool-touch steam wands
• Works with: the steam wand tip, seated at the base of the threads

INSTALLATION

Quick DIY swap; remove the old o-ring and roll the new one into place at the base of the tip threads.

PRO TIPS

• Replace both wand tip o-rings as a set, if one has hardened from heat cycling, the other is usually close behind.