ChillWaves 304 Stainless Steel Pipe Fitting, Hex Nipple 3/4" NPT Male x 3/4" NPT Male Thread Adapter(6-PACK)

Pipe fittings are the components in the pipeline system that play the roles of connection, control, reversal, diversion, sealing, and support.Note that the 304 Stainless Steel Nipple are US NPT standard threads with a 60 degree taper.Product introduction：1. It is used to connect internally threaded pipe fittings of the same diameter or to extend the length of pipes. NPT female and male threads are hard connections, which typically require sealing.2. It is suitable for gases, water, oil and non-corrosive liquids. Widely used in grease, fuel, refrigeration, water, oil and gas and hydraulic systems.3. The hex fittings are designed for easy tightening or loosening. 4. The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the joint is stronger after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads. 5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)PACKAGE INCLUDED:6 x 3/4" MNPT x 3/4" MNPT Hex Nipple1 x Teflon tape

• SIZE - 3/4" NPT Male x 3/4" NPT Male Hex Nipple. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
• MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
• USE - It is used to connect female threaded pipe fittings of the same diameter or to extend the length of pipes.It is a fitting specially used in pipeline connection engineering.It is suitable for use with gases, water, oil, and non-corrosive liquids.
• WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328°F to +392°F (-200°C to +200°C)
• NOTE - NPT is a tapered pipe thread with a 60°taper and generally cannot be screwed to the end.