CMA Manual Water In-let Valve Re-build Kit

CMA Manual Water Inlet Valve Rebuild Kit

Everything needed to rebuild a worn or leaking CMA manual water inlet valve, bundled in one kit instead of five separate part numbers. This is the fix for a valve that's started weeping or sticking rather than a full valve body replacement.

SPECIFICATIONS

• Kit includes: 1x W_154, 1x AS_37, 1x AS_38, 1x AS_42, 1x W_160

COMPATIBILITY

• Fits: CMA manual water inlet valve

INSTALLATION

DIY-doable if you're comfortable working through a valve stack in order, but a technician is a safer bet if you've never had one apart before.

PRO TIPS

• Lay the small washers, spring, and pin out in the order you remove them, this valve stack is easy to reassemble with a washer flipped or out of sequence, and that's the most common cause of a rebuild that still leaks.
• A valve that only weeps when the machine is idle (not while water is actively flowing) is almost always this seal kit, not a cracked valve body, worth trying the cheaper fix first.