DIP-KK300 High Flow Peristaltic Pump 24V Stepper Motor 4 Rotors 0-300ml/min Intelligent Adjustable Speed Lab Dosing Pump(UK,Dip-kk300-b194)

Water PumpsDIP-KK300 4 Rotors 0-300ml/min High Flow Peristaltic Pump 24V Stepper Motor Intelligent Adjustable Speed Lab Dosing PumpSelection Guide1. Know what liquid do you want to transfer?(Imported BPT Tubing Chemical stable; Silicone tubing is suitable for Neutral liquid.)2. What's your bottle volume and how many bottles you want to fill 1 minute?3. Select the tubing size based on the following chart.All the data in the chart is tested on the water.Basic ParametersBasic ParametersDIPump-KK300 with Stepper motorPower supplyDC24V 2AFlow ml/min300ml/minPower(Max)<;50WWeightAbout 1.25KGNoise65dB(Less than 35dB measured at a distance of 50cm)Speed range0.1-400 rpmSpeed adjustment resolution0.1 rpmDisplay modeLED 4-digit digital tubeControl methodRotary encoder, foot switch, external analog (4-20mA and 0-5V,0-10V),485 communication controlOperating modeSpeed Mode and Flow ModeWay of workingFully automatic cycle, semi-automatic cycle, manualSupport functionStart and stop, reversing, speed regulation, calibration, suck back, parameter memory, etc.Tubing DescriptionReference flow rate (unit: ml/min)Tube codeS13S14S19S16S40S25Inner diameter(mm)XOuter diameter(mm)0.8×4.01.6×4.82.4×5.63.2×6.44.0×7.24.8×8.0Max Flow rate1446104177262313Tube codeB13B14B19B16/ / Inner diameter(mm)XOuter diameter(mm)0.8×4.01.6×4.82.4×5.63.2×6.4/ / Max Flow rate1457117198/ / Flow graph-SiliconeThe vertical coordinate is: Flow rate(ml/min)The abscissa is: Rotating speed(RPM)Flow graph-BPTThe vertical coordinate is: Flow rate(ml/min)The abscissa is: Rotating speed(RPM)Various Applications# Canned liquid# Laboratory# Food industry# LED Display: Rotating speed(real time)Forward and Reverse: CW/CCWRotary encoder: Adjust the speed and setting the parametersKK300: Quickly to replace the tubingWith stepper motor-6000H lifetimeWaterproof power interfaceFoot switch with GX16-9 The foot switch is used to replace the start/stop button. In a suitable interface, step on the foot switch to control the start and stop of the pump.The foot switch is a standard accessory, and the line length is 2 meters.Size Drawing150x160x116.2(LxWxH)Combined control portFoot 1: leave blankFoot 2: 485 BFoot 3: 485 AFoot 4: foot switch +Foot 5: Foot switch -Pin 6: Analog signal 5V-/10V-Pin 7: Analog signal 5V+/10V+Pin 8: Analog signal mA-Pin 9: Analog signal mA+Foot switch supports active input ( signal)The foot switch is used to replace the start/stop button. In a suitable interface, step on the foot switch to control the start and stop of the pump.

• Water Pumps
• DIP-KK300 High Flow Peristaltic Pump 24V Stepper Motor 4 Rotors 0-300ml/min Intelligent Adjustable Speed Lab Dosing Pump