Dust Extractor, for Milwaukee 2912-DE M18 1"" Dedicated Dust Extractor (Size:15.2 x 3.8 x 15.7 in) - Bare Tool, Red,black

Brief Introduction Includes Large and Small Dust Nozzles Pairs with 2912-20 and 2914-20 Rotary Hammers Translucent box to see dust levels Small Nozzle for drilling up to 5/8" holes Large Nozzle for drilling up to 1" holes captures 99.97 percent of all particles greater than 0.3 microns Will not work without HEPA filter Extra HEPA Filters Available The Box Contains Products? Dust Extractor w/ Dust Box and Filter Small Nozzle Large Nozzle Owner's Manual Volts 18V Power Cordless Length 15.2 in Width 3.8 in Height 15.7 in Weight 4.2 lbs

• The 1-inch Special dust collector (2912-DE) has an inline design and can be connected directly to and powered by the M18 1-inch SDS Plus rotary hammer (2912-20 and 2914-20).
• Using the same replaceable certified HEPA filters as other filters, which filter 99.97% of particulate matter larger than 0.3µm, means greater compatibility on the job site.
• Built-in adjustable depth stop and ruler for easy and precise adjustment. When the diameter of the drilling hole does not exceed 1 inch and the depth does not exceed 6 inches, the dust collector can fully meet the requirements of Table 1.
• The extractor has an automatic pulse filter cleaning mechanism that automatically cleans the filter after each use, ensuring more efficient drilling for longer periods before the dust box needs to be emptied.
• The dust box is equipped with a vacuum port that allows the dust to be sucked out with a large vacuum cleaner or vacuum cleaner (i.e. 8960-20) rather than dumped into the trash, ensuring minimal exposure.