FTDI USB-to-TTL (Serial) Cable 5V

• I/O pins configured to operate at 5V
• Allows for a simple way to connect TTL interface devices to USB
• Can be used to program your Arduino Pro, Pro Mini and Lilypad
• Well protected against the elements
• RoHS compliant

The FTDI USB-to-TTL (Serial) Cable 5V is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cable is terminated with a 0.1" pitch, 6-pin connector with these pinout: RTS, RX, TX, 5V, CTS, GND (RTS is the green cable and GND is black).

This cable has the same pinout and functionality as Sparkfun's FTDI Basic Breakout board; you can use it to program your Arduino Pro, Pro Mini. For use with those boards, align the black and green wires of the FTDI cable with the 'BLK' and 'GRN' labels on the PCB. There are pros and cons to the FTDI Cable vs the FTDI Basic. The FTDI Basic has great LED indicators, but requires a miniB cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.