JT-19 Dental Wet Model Trimmer, 500W 110V Abrasive Disc Gypsum Arch Inner Disc Wheel Dry Model Trimmer with Power Cord, Plaster Abrasive Grinder Dental Outer Shapes Equipment for Dental Office

How to use:1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve2. Connect the waste-disposal tube to the unit3. Connect the power cord, and switch on the power switch (O=off, l=on)4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)Attention:If there is some abnormal noise when working onPossible reason：① Axon is loosing ② Disc is not plain enough。How to solve it：①Dissemble the disc⒃ with spanner，make the snapRing tightly；② change the disc。The machine does not work when power onPossible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switchSpecifications:Voltage: 110V/50Hz±10%Power: 500W Rotational Speed: 2800 rpmDimensions: 44×35×35cm Weight of the dental trimmer: 20kgDisc Diameter: fits 23.5-32cm / 9inch - 12.5inchPackage:1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment

• 【Main Parameter 】: Voltage: 110V/60Hz;Power: 500W Rotational Speed: 2800 rpm;Dimensions: 44×35×35cm Weight of the trimmer: 20kg.
• 【High Power】: 500W engine of the plaster dresser. Constant size, stable performance, no fatigue. 2800 revolutions per minute for easy slicing. In the trimmer workshop, noise and vibration are prevented by the perforated disk at the bottom.
• 【Voltage】: 110V/60Hz±10%.Model Trimmer is widely used in restorative dentistry.It is a necessary tool for trimming plaster models,This machine is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality.
• 【Stability】: The dental profile trimmer weighs more than 20 kg and is mounted on non-slip feet. The trimmer can be made to work dry, but it is recommended to work under water.
• 【Ergonomic】: The plaster trimmer has a rounded external shape for easy cleaning. Wide gradient and tilting table, full-screen window, cleaning size to work at 3 different angles, adjustable screws.