KINTO KAKOMI IH Enamel Pot (1000ml/34oz)

• Capacity: 1000ml (34oz)
• Dimensions: ⌀220mm x H110mm x W255mm (⌀8.8in x H4.4in x W10.2in)
• Materials
  • Pot: Stainless Steel (enamel coating)
  • Lid: Stainless Steel (enamel coating), Natural Wood (walnut, oil finish)
• BPA Free
• May be used over direct flame, 100V and 200V induction heater, halogen heater, ceramic hob
• Oven Safe
• NOT Microwave Safe
• Dishwasher Safe (Pot only)
• Made in China

When using it for the first time, please gently wash it with neutral detergent. Do not use in the microwave. Remove the lid when using in an oven as rapid rise in temperature may cause breakage. Do not use the Lid in a dishwasher. The time it takes to boil may vary depending on the type of induction heater. Adjust heat to medium or lower when using on 200V induction heater. When using on a gas stove, ensure the pot is stable and not unbalanced. Please place the pot on the center of the burner. Do not use it on a kerosene heater. Do not heat without water. Do not pour cold liquids over it when it is heated without water. Do not put too much water. It might cause boiling over and injuries. Please use the capacity up to about 70% full as a guideline. Do not heat rapidly at high temperatures, and ensure thorough stirring while heating. The handle will be hot when heated. Use insulated oven mitts to hold. When opening the lid, be careful with the steam as it may cause scalds. If you place the product on a table while it is hot, it may leave marks, use a trivet. Hold the pot with both hands when carrying. Since enamel has a glass-like surface, please be careful not to drop, strike, or subject it to strong impacts, as these may cause cracking or chipping. Do not touch with a wet cloth or put in a wet place while it is hot as rapid cooling may cause breakage. Do not use it if the lid knob is loose, cracked, or deformed. Do not soak wooden parts in water to prevent cracks or deformation. Immediately wash and dry well after use, and keep dry when not in use. To prevent rust, do not leave residue containing salt or acid on the surface for a long time and do not store it in humid places. Wash with care. Do not use abrasive cleansers or steel wool. Do not use hard metal objects to remove burnt residue. If the pot becomes burnt, boil water in the pot, add 1 tablespoon of baking soda and simmer in low heat for 2-3 minutes, let it cool down and rub with a melamine sponge. Please be careful not to cut yourself on the edge when cleaning. Depending on the manufacturing lot or characteristics of the materials, there may be variations in size, weight, and colour for the same product. Due to the characteristics of the material, variations in colour, partial discolouration, or black spots may occur. This is not a defect and does not affect the quality of the product.