Lever-type Crane Traction Device Block Chain Hand Chain Crane Wire Rope, Crane Handle Basket 1.5 Tonnes(20m)

Name: Wire rope hand hoistInstructions for use:1. Installation: First insert the hand hoist wire rope into the safety device (note: the mark of "upward when installing") or then pass the wire rope from the guide through the hand hoist. One end of the safety device rope is connected with the safety device handle, and the other end is connected with the hanging rail (see picture).2. Work: When pulling the reverse lever of the hoist, the hanging bar and the hoist move down together. The safety device cannot slide freely due to the weight of the handle and the rope. At this time, use the handle to push the handle of the safety device up. , Make the safety device slide down, when pulling the hoist forward rod, the hoist drives the hoisting rail to move up together, at this time the safety device is not jammed.3. When the hoist fails or other reasons cause the hoist bar to suddenly slide down, the bar pulls the safety device rope and the safety device handle so that the two clamps in the safety device tightly hug the wire rope so that the bar does not slide down, so as to achieve The purpose of security.

• Special lifting hook: thickened and reinforced, strong and durable, service life
• Solid steel wire rope: has particularly high breaking force and wear resistance
• Safety device: higher safety factor
• Four major features: time-saving and labor-saving,high-quality materials,compact structure,safe and durable
• Multi-functional tensioner, exterior wall hoist, hand-operated hoist