Mills High Precision HSS Metal Cutter Co8 Cobalt D1-32mm 2 3 4 Flutes Teeth Aluminum Milling Tool Key Seater Router Bit(24mm,2 Flutes-HSS)

Drill Bit Sets-Sharp cutting edge for both roughing and finishing.-Provide rapid chip removal. Used for milling low-carbon steel, aluminum, copper, iron and non ferrous materials.-Not recommended for ceramic, stone,wood.-Suitable for low-speed machining.HSS-AlAluminium-containing high-speed steel-W6Mo5Cr4V2AlC 1.05 ~ 1.20, Si 0.60, Mn 0.40, W 5.50 ~ 6.75, Mo 4.50 ~ 5.50, Cr 3.80 ~ 4.40, V 1.75 ~ 2.20, AL 0.80 ~ 1.20, s0. 0.030, p0. 0.030, the rest are iron and impurities.HSS-Co8-W2Mo9Cr4VCo8, 67~70HRC. The W content of M42 is obviously reduced on the basis of M35, and at the same time, the Mo content is increased to about 8%.It is suitable for machining stainless steel, titanium alloy, etc.Note: Due to different standards, the size of Co8 is shorter.3x6x8x52, 5×6×15×60,6x6x13x57, 8x8x19x63, 10x10x22x72, 12x12x26x83, 14x12x35x85, 18x16x40x95,20x20x45x110Specification&Cutting ParametersSpeeds and feeds are the most important factors to consider for best results in millingimproper feeds and speeds often cause low production poor work quality and unnecessary damage to the cutter.Too high a speed or too light a feed leads to rapid wear and dulling of the cutter, reducing tool life.Note: HSS and solid carbide are two different materials.Processing environment and parameters are different.4 Flutes are mainly used for side milling and face milling.We have independent packing boxes for each milling cutter to protect them from bumping.Because the material of HSS will rust, we will coat the surface of milling cutter with anti-rust oil, so that they can be stored for a long time and increase the service life. When in use, the cutter can be cleaned, be careful that the cutting edge of the cutter is , and pay attention to the cutting dust during processing.==========High-concerned chemical : NoneDiameter : 1 1.5 2 3 4 5 6 8mm 10mm 32mmCoating : Full-finishOrigin : Mainland Model Number : HSS Milling CutterType : Flat End MillsMaterial : High Speed SteelOverall Length : 60mm~250mmTeeth : 2 3 4Machining Application : Plastic Aluminum Copper Steel Soft MetalCutting Condition : Low Speed Machining

• Drill Bit Sets
• Full-finish Coating:Each cutter is coated with a full-finish to resist rust, ensuring longevity and easy maintenance.
• Optimized for Low-Speed Machining:Designed for low-speed machining, these end mills provide rapid chip removal and efficient processing.
• Versatile Teeth Options:Available in 2, 3, and 4 flutes, these end mills cater to various milling applications, from roughing to finishing.