Speedometer Motorcycle Tachometer Universal Digital RPM Board Gear Indicator Oil Water Level Instrument Gauge

Material: Rubber + Alloy + Plastic;Package List:1 Motorcycle Gear Sensor;Steps:This module requires setup after installation. Please only set it up when the engine is warm (normal idle). Find a long, straight road with low traffic. The device will not repeatedly learn the same gear, making it easy to set it up on the road. If necessary, you can even downshift and stop during the setup process. Do not stare at the display; pay attention to road conditions and drive cautiously as usual! Turn on the ignition switch. The display counts down (from 6 to 1), indicating that the memory has been cleared. -When "L" flashes, put the engine in neutral and let it idle. -The display will flash "1". Select first gear, release the clutch, and keep the engine speed above idle. As the device learns gears, the display flashes faster. -When the display shows "2", select second gear. -Repeat this process until all gears (5 or 6) have been learned. -The device is now programmed and should display the gears correctly.Now, when you turn on the ignition switch, the display will count forward (1 to 6), indicating it is working correctly.Other:If some gears are displayed incorrectly, reset the device and reconfigure it. If you have changed the gear ratio (installed a front or rear sprocket), or installed a tachometer (or other tachometer calibrator), you may need to reset and reconfigure. Turn the device off and on 6 times consecutively while the display counts to 3, 4, or 5. You can turn the display on/off by turning the ignition key on/off. The next time you turn the device on, the display will count backward (6 to 646). At this point, the memory has been cleared, and you can perform the setup procedure.

• Aesthetics: The practical yet stylish design complements the overall appearance, making it stand out and enhancing the motorcycle's operational efficiency and aesthetics.
• Functionality: It can measure speed, distance, etc. As long as there is a motion signal input, the stopwatch will automatically start working, recording your trajectory at any time, providing you with a better riding experience.
• Features: The motorcycle's instrument panel displays gear positions, making it a multifunctional and adaptable solution for riders.
• Installation Instructions: Before purchasing, please confirm that this product is suitable for your motorcycle to ensure accurate model selection, making installation and use smoother and avoiding unnecessary trouble.
• Excellent After-Sales Service: Every product undergoes durability and compatibility testing. For any questions or assistance, we provide standard after-sales service to ensure you have the best shopping experience.