SUSCo KE2CH Postless RBA Boro Bridge (DISCONTINUED)

SUSCo KE2CH Postless RBA Boro Bridge

Vapor Authority Vaper's Choice: Best Dual Coil Boro Bridge

Straight Up Supply Co present the KE2CH RBA Boro Bridge, a post-less rebuildable bridge for boro tanks and devices. The KE2CH Bridge features a 4 terminal post-less build deck, 9 sizes of airflow pin options, and an additional positive post to accommodate the larger airflow pins. The KE2CH Bridge can be configured to be used for MTL, RDL, and even DL styles of vaping, but is recommended for use with larger diameter coils. The KE2CH Bridge is compatible with Boro tanks that accept Boro Bridges.

The build deck of the KE2CH Bridge features a four terminal setup that can fit left hand wrapped coils and right hand wrapped coils, and can accommodate a DUAL COIL build. Each terminal features wide openings to be compatible with most wire formats, and a small flathead grub screws. Perpendicular to the posts are two large wicking channels for positioning your wicks. The base of the KE2CH Bridge is 510 threaded, eliminating the need for an adapter to build and pre-fire your coil.

Pro Tip: Be careful with the small grub screws when tightening them down. Do not over tighten as they can strip. If slipping begins, replace with a new screw included in the parts pack. The 510 threads built into the bottom of the KE2CH are shallow. A mod with a 510 threaded to the top is needed to secure the bridge when building, if pre-firing the coil is required.

Product Includes:

• 1 x KE2CH Bridge
• 1 x Positive post for standard airflow pins
• 1 x Positive post for larger airflow pins
• 9 x Airflow Pins
• 1 x Serial number authenticity card