Tru Tint RZ High-Performance Epoxy and Resin Base Pigment for Seamless Floors & Crafts 6 oz. for Coloring 3 Gallon Epoxy Kits (Sage)

Epoxy resin pigment designed to tint a standard 3 gallon epoxy kit to a solid color. 6 oz. size. Tru Tint RZ is a potent line of colorants designed to provide rich permanent colors with a variety of our high-performance resins such as our Epoxy HP, Essential Primer, Polykoat 85, AU 85, Acri-Thane and our line of acrylic sealers. They are designed to provide an opaque finish and used primarily with decorative media systems such as quartz, vinyl chips and metallic pigments. Loading of the pigment will vary depending on the chosen resin and the desired intensity. The pigment is packaged in 6 oz quantities, the amount required to tint a common 3 gallon epoxy kit to an opaque finish. To use, first blend both your A and B components separately to make sure no separation has occurred. Then add the tint to the A side of your kit and blend for one minute with a low speed drill mixer and proper paddle. When combining both the A and B, mix again for two minutes before applying to the surface.

• 6 oz. epoxy resin pigment designed to tint a standard 3 gallon epoxy kit to a solid color
• Tru Tint RZ is a potent line of colorants designed to provide rich permanent colors with a variety of our high-performance resins such as our Epoxy HP, Essential Primer, Polykoat 85, AU 85, Acri-Thane and our line of acrylic sealers. They are designed to provide an opaque finish and used primarily with decorative media systems such as quartz, vinyl chips and metallic pigments.
• Loading of the pigment will vary depending on the chosen resin and the desired intensity. The pigment is packaged in 6 oz quantities, the amount required to tint a common 3 gallon epoxy kit to an opaque finish.
• To use, first blend both your A and B components separately to make sure no separation has occurred. Then add the tint to the A side of your kit and blend for one minute with a low speed drill mixer and proper paddle. When combining both the A and B, mix again for two minutes before applying to the surface.