Two-Channel Control IoT AC Power Relay Module for Arduino Raspberry Pi PLC MCU
€24.00
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von aiignitestudio.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€24.00
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von aiignitestudio.com
30 Tage kostenlose Rückgabe Details
Produktdetails
| Artikelnummer | 231403904 | Erscheinungsdatum | 2026/06/18 | Listenpreis | €24.00 | Modellnummer | 231403904 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- Two-channel I/O control IoT Power Relay Module. Each channel has both a Normally ON (N/C) and a Normally OFF (N/O) NEMA-15R receptacle. The power input cable has a NEMA-15P plug. The AC120V power output for each receptacle can be directly controlled by controllers. Simplifying wiring and making maintenance easier.
- Control terminal: Two 2-position pluggable terminal blocks. It supports a wide range of AC and DC control signals, from AC 8V-150V and DC 3V-120V. Compatible with GPIOs from Arduino, Raspberry Pi, ESP32, MCU, PLC, etc. Therefore, it can support almost all automatic controllers and HVAC controllers.
- Both input control terminals utilize optocoupler control internally, ensuring that Channel-1 and Channel-2 are electrically isolated from each other, as well as from the mains power supply. Based on this electrical isolation design, you can even use two different controllers simultaneously to control channel 1 and channel 2 independently.
- Both input control terminals are equipped with red indicator lights, CH1 and CH2. When the indicator light is on, it means that a control signal has been input, at this time, the Normally OFF output has power, while the Normally ON output does not. When there is no input control signal or no controller is connected, the indicator light is off, the Normally OFF output has no power, while the Normally ON output has power.
- The power input cable has a NEMA-15P plug, 14AWG cords for 15 Amps current. Cable length 20 inches.
- Normally OFF receptacle rated output current 12 Amps. Normally ON receptacle rated output current 5 Amps. Due to limitations imposed by the input cable specifications, the total output current of all output receptacles cannot exceed 15 Amps.
- Equipped with a resettable rocker thermal circuit breaker overload protector, rated for 15 Amps. Includes a built-in red indicator and supports manual control of all receptacle outputs.
- Equipped with a T-MOV Surge Protective Varistor inside. Maximum discharge current 10k Amps. The T-MOV varistors offer quick thermal response due to the close proximity of the integrated thermal element to the MOV body, avoiding the danger of MOV overheating or even burning.
- Very low static power consumption. When there is no control signal, the power consumption is only about 0.1 watts. When both channels are triggered, the power consumption is only about 0.9 watts.
- Compared to products from other companies, this product does not come equipped with an "Always ON" receptacle. However, if you only use one of the channels, then the Normally ON receptacle of the other channel can be used as an Always ON output.
| ASIN | B0GR85JF68 |
|---|---|
| Model | F-1085 |
| Brand Name | OONO |
| Part Number | F-1085 |
| Contact Type | Normally Open and Normally Closed |
| Manufacturer | CZH-LABS |
| Mounting Type | Wall Mount |
| Connector Type | Nema-15 |
| Current Rating | 15 Amps |
| Contact Material | Copper |
| Specification Met | RoHS |
| Included Components | Module x1, Screw x4 |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage