Ultrasonic Flaw Detection Ultrasound Wave Flaw Tester with 0 to 15000mm Frequency 20-2000Hz for Weld Inspection and Material Testing Device 36dB High Gain One-Key Automatic Calibration

Specification: Detection range: (0~15000)mm Operating frequency: (0.2~20)MHz Sound speed range: (100~20000)m/s Repetition frequency: (20~2000)Hz Dynamic range: ≥36dB Vertical linear error: ≤1.5% Horizontal linear error: : ≤0.1% Resolution: : >42dB(5P14) Sensitivity margin: : >65dB(200mm deep with 2 flat bottom holes) Digital suppression: : (0~80)%, does not affect linearity and gain Electrical noise level: ≤10% Probe type: straight probe, oblique probe, twin probe, penetrating probe Gate: incoming wave gate, lost wave gate; Single gate reading, double gate reading, peak trigger, edge trigger Alarm: Buzzer alarm, LED light alarm Power source: DC (DC) 9V; The lithium battery works continuously for more than 12 hours Size: 263×170×61(mm) Weight: 1.92kg Ambient temperature: (-10~50)℃ Relative humidity: (20~95)%RH Standard accessories: 1: Fault detector main machine: 1 2: Straight probe: 1 3: Inclined probe: 1 4: Power adapter: 1 5: BNC probe connection wire: 1 6: U disk memory: 1 7: Shoulder strap: 1 8: Manual: 1 9: Certificate: 1 10: Warranty card: 1 11: Test report: 1 12: Instrument box: 1

• Detection range: (0~15000)mm
• Operating frequency: (0.2~20)MHz
• Sound speed range: (100~20000)m/s
• Repetition frequency: (20~2000)Hz
• Dynamic range: ≥36dB