Waste Oil Furnace Heater Boiler Replacement Air Compressor Pump Reznor. Replaces SOA-V115-NA, & # 7190-194 Gast 86R 87R LOA-101. Clean Burn Heater Parts

Replacement Air Pump used in Reznor Waste Oil Heaters, Waste Oil Burners, Replaces SOA-V115-NA, & # 7190-194 Gast 86R 87R LOA-101 ZWS250. High Speed Engraving and Carving Compressor. This is a Complete Aftermarket Alternative Replacement Air compressor for Reznor Waste Oil Heaters. Just re-drill mounting holes on base pan for install. - Looks slightly different, but will fit & perform as the original. Re-attach air lines, hard wire into power supply, bolt to base *Bolts not included* Comes with capacitor only. Does not come with any outlets, fittings or any other parts or pieces. 1 year warranty No need to buy a $900+ reznor compressor that will need retrofitted, this is easy. Note: This compressor is for 110 Volt only, Replaces SOA-V115-NA, & 7190-1946, do not use on old style 220 volt Reznor 500. * this is for a GSE brand pump** - World leading technology in the compressor world. These should have been installed in the heaters to begin with. Extremely durable!! Is your heater having issues with not lighting the flame? Your compressor may be worn out. Check the following to see if your compressor is bad: Hold the air bleed valve by the 4-way tee closed with your finger & then see if will light. If so, the compressor is most likely your problem; it probably has a blown or worn piston ring assembly. (The pressure switch will turn the flame off if the Psi is low). We also sell rebuild kits in our store for these as well) Brand new Compressor/Vacuum Pump,0.1 HP,60 Hz,115V Product Details at rated load Power at rated load Motor Type Voltage/Frequency Starting Current Net Weight 39lpm (1.38cfm) 5bar (73psi) -880mbar (26”Hg) 2A 350W (0.47HP) 110Volt 5.8A 5.3kg (11.7lbs)

• Alternative Replacement Air compressor for Reznor Waste Oil Heaters GSE branded Air Compressor Replaces the Original Pump used for half the price Just re-drill mounting holes on base pan for install. - Looks slightly different, but will fit & perform as the original. Re-attach air lines, hard wire into power supply, bolt to base *Bolts not included* 110v