3M Bondo Glazing and Spot Putty 6-Pack, 4.5 oz Tubes, Nitrocellulose Automotive Glazing Putty for Filling Pinholes, Scratches, Minor Dings and Hairline Cracks, Sandable in 20 Minutes

3M Bondo Glazing and Spot Putty is the finishing step that helps small repairs disappear instead of showing through your paint job. This kit includes six individual 4.5 oz squeeze tubes, giving collision repair technicians and serious DIYers a convenient supply of one-part putty for pinholes, sand scratches, stone chips and other shallow defects on automotive body panels and similar surfaces.Used in the fill stage of the 3M body repair system, this glazing and spot putty replaces time consuming mixing and heavy sanding with a quick skim coat. You spread a smooth layer over feathered repair areas to level swirl marks, sanding tracks, hairline cracks and tiny dings that remain after shaping body filler, so the repair area blends cleanly into the surrounding surface.The one-part nitrocellulose formula comes ready to use straight from the tube, with no separate cream hardener to measure, no mixing board to clean and less wasted material. Under typical shop conditions it offers a short working time and is sandable in about 30 minutes, helping small repairs move efficiently from fill to prime while low shrinkage and non-staining performance support durable, even topcoats.Use this glazing and spot putty on properly prepared bare steel or aluminum panels, fiberglass parts and sanded, primed or previously painted surfaces. It also fits naturally into home and shop projects that need a fine, easily sanded, paintable putty, including minor cosmetic repairs on wood trim, furniture edges and hobby pieces. It can also support small cosmetic fixes on household metal fixtures, interior panels and other projects where a smooth, paint ready surface is important. For best results, clean and sand the area, apply thin coats, allow to dry fully and finish sand before priming and painting.

• 6 TUBES, 4.5 OZ EACH: Pack includes six individual 4.5 oz tubes of 3M Bondo glazing and spot putty, providing enough material for multiple DIY and shop repairs on pinholes, scratches and minor dents
• TRUSTED 3M BONDO BODY REPAIR: One-part nitrocellulose glazing and spot putty trusted in shops and garages helps techs and DIYers refine filler repairs for a smooth, paint-ready surface
• FAST, SMOOTH FINISHING RESULTS: Helps repairs blend into surrounding panels; nitrocellulose formula gives about 3 minutes of work time and sands in around 20 minutes to keep small repairs moving
• ONE-PART, NO-MIX APPLICATION: Glazing and spot putty dispenses from a squeeze tube with no cream hardener, so you squeeze, spread over prepared areas and sand smooth before primer and paint
• READY FOR SHOP OR HOME PROJECTS: Compact tubes store easily so you can keep a backup for body pinholes and scratches plus small wood, fiberglass and interior repairs that will be primed and painted