8" Shasta Vent 30 Degree Elbow Kit

Elbow kit Includes: 2 - 30 degree elbows and 1 - elbow support bracket. Elbows are used for offsets in the chimney system to avoid structural members or other obstacles. Shasta Vent All-Fuel HT Chimney system can accommodate two offsets and returns, for a maximum total of four elbows in the system. Elbows cannot be combined to create an angle greater than 30 Degrees. Offsets must be supported by either an Elbow Support or Tee Support Bracket.

Additional Information:

Shasta Vent All-Fuel HT Chimney is a double wall, solid-filled residential chimney featuring .020" type 304 Stainless Steel inner and outer walls with a 2" clearance to combustibles. All-Fuel HT Chimney also features precision engineered twist end rings and quick and easy Locking Bands. Elbows do not contain the twist lock teeth like other systems, so they can be easily rotated to the desired angle of your installation, secured by the locking bands once in position. The high-temperature ceramic blanket insulation is encased between the stainless steel walls of the pipe sections to maintain a strong draft, while maintaining a relatively cooler temperature on the exterior wall. In installations where offsets are required up to four 30 Degree elbows, each capable of rotating 360 Degrees, can be used in the system. The Shasta Vent All-Fuel HT Chimney is ETL Listed by Intertek to the HT requirements of UL 103. Tested to 1000 Degrees F continuously, 1400 Degrees F for 1-hour, and 3x 2100 Degrees F for 10-minutes as would be encountered in a creosote fire

  ShastaVent Catalog

  Installation Instructions