Desktop Hot Wire Foam Cutting Machine, 50-300 Degrees Celsius Temperature Adjustable, Cutter Width 15", for Sponge, Pearl Cotton, KT Board, Polystyrene Cutting

SpecificationsProduct Name: Foam Cutting MachineColor: BlackMaterial: Fireproof Density Board + AlloySize: 78x38x7cmMax. Cutting Height: 20cmVoltage: AC 110V/220VPower: 30WThe Wire Coil Diameter:54CMTemperature Adjustable: 50-300Application: Cutting Foam, Sponge, Pearl Cotton, KT Board, etc.Regarding the problem of the electric cutting wire: the three-meter electric heating wire is on the wire storage wheel, and the customer needs to unscrew the screw before pulling it out for useNote:-Heating wire temperature can be adjustable, cutting different density and material need to adjust the appropriate temperature cutting.-Usually, the electric wire is not red or slightly red is suitable. It can not be cut if the wire is very red.-When cutting, the wire temperature is very high, should keep away from flammable and explosive materials.-It is recommended to wear work glove when cutting.-When complete cutting, please cut off the power in time.-Some material may have a smell when cutting, it is recommended to cut in the ventilation environment.Package Includes:1 x Foam Cutting Machine1 x Power Cable1 x Cutting Wire

• 【Wide Applications】- This is a professional foam hot-cutting tool, for cutting different density foam with fine cutting edge, no mess. Desktop design provides the cutting plane, operation is easy and convenient. It allows you to create straight edges or complex shapes.
• 【Premium Material】- This Electric wire foam cutting machine is constructed of the alloy frame and the fireproof density board, it is light weight, the alloy frame is adamant and corrosion resistant.
• 【Temperature Adjustable】- The Heating wire temperature can be adjustable, It can cut different density and material by adjusting the appropriate temperature cutting. Used for cutting low density foam material, like foam, low density sponge, EPE, KT board, extruded plastic, board wax and so on.
• 【Warm Tips】- Usually, the electric wire is not red or slightly red is suitable. It can not be cut if the wire is very red. When cutting, the wire temperature is very high, should keep away from flammable and explosive materials. It is recommended to wear work glove when cutting. When complete cutting, please cut off the power in time.
• 【Installation】- 1. Install the pillar, tighten the screw; 2. Install the demension ruler; 3. Release the wire, make the wire pass through the holel; 4. And then pass through the board hole, and let it buckle in the spring; 5. Turn on the power switch.