Pressure Equalizing Addition Funnel with PTFE Stopcock 24/29 Joint Borosilicate Glass Graduated Dropping Funnel for Laboratory (100ML)

★★★★★ 4.2 138 Bewertungen

€13.60
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von aiignitestudio.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€13.60
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 18.09.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von aiignitestudio.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 211009874 Erscheinungsdatum 2026/04/04 Listenpreis €13.60 Modellnummer 211009874
Kategorie

A constant pressure drip funnel is a type of separating funnel that can perform operations such as liquid separation and extraction. The dropping funnel features a joint at top and bottom, drip stem, pressure-equalizing arm, PTFE T-Bore stopcock and graduation marks for easier measuring. Unlike other separators,the constant pressure separating funnel can ensure that the internal pressure remains unchanged. It can to prevent backsuction, and secondly, to ensure smooth flow of liquid in the funnel and is to reduce the impact of the increased liquid on gas pressure.Thus, it is more accurate in measuring gas volume. Note: Before use, the piston should be coated with a thin layer of lube. After it rotates freely, close the piston and fill the funnel with water to check if there is any water leakage at the piston. When the separation funnel is not used for a long time, a piece of paper should be placed between the upper mouth and the plug, as well as on the piston surface. To prevent adhesion at the frosted area,and rubber bands should be used to secure the piston to prevent it from falling off.

  • 1.Pressure Equalizing Addition Funnel is commonly used in general closed system experiments and experiments that require dripping solutions; it is mainly connected with reaction vessel to drop solution, which can isolate the air, prevent solvent from volatilizing, and speed up experiment process.
  • 2.The funnel adopts a PTFE piston and be capable of flexibly controlling liquid outflow. Commonly used in reactions to control the amount of liquid added or to separate the liquid after extraction.
  • 3.The scale of the funnel is clear and is great for controlling the flow on fluid transfers that require a high degree of accuracy.
  • 4.The funnel is made of borosilicate glass, with a maximum tolerance temperature of 600℃ and a minimum tolerance temperature of -180℃.
  • 5.The funnel adopts standard frosted mouth ,Delicate frosted, good sealing, versatile for general use.
Color Transparent
Capacity 100 Milliliters
Brand Name JiaoFengHeng
Manufacturer JiaoFengHeng
Material Type Glass
Included Components Additional Funnel

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.2 von 5
★★★★★
138 Bewertungen | 57 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
78% (108)
4 Sterne
6% (8)
3 Sterne
3% (4)
2 Sterne
2% (3)
1 Stern
11% (15)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.